Aluminum |
Stainless Steel |
Stainless Iron |
Galvanized Steel and Surface of Stone |
Plastic and Concrete |
Recommendation Method
1. For machinery parts, use spraying or dipping method to clean. Dilute the product with the ratio of 1:50 for spraying method. Dilute the product with the ratio of 1:5-10 for dipping method.
2. For the surface of automobile, train and airplane, dilute the product with the ratio of 1:40.
3. For factory floor, dilute the product with the ratio of 1:10-60 depending on smeary extent.
4. Before wax, mix the product with Blue Power Stripper and All Purpose Cleaner (according to the ratio of 1:1:1-1:5:2 depending on the dirty situation), and then dilute the cleaner with the ratio of 1:10-20 to clean the floor.
Cautions
The performance will be best when the temp of the diluted solution is between 45-50°C. Do not use at more than 60°C. Avoid contact with eyes. If accidentally splashed into eyes, rinse with plenty of water. Wear rubber gloves for workers with allergic skins. Add appropriate defoamer when there is too much foam in assembly line.
Vivid Aqueous-based Degreaser is optimized for metal surface such as aluminum, stainless steel, stainless iron, galvanized steel and surface of stone, plastic and concrete.
Performance | Index |
Appearance | Light yellow transparent liquid |
Odor | Odorless |
PH value | 13-14 |
Stability | No crystal and precipitation at 2-5°C |
Viscosity/mPa • s,22°C | ≤10 |
Detailed safety information, please check Material Safety Data Sheet.
Package: 4kg/barrel, 4kg/barrel×4/box or 20kg/barrel.
Storage: Stored at ventilated dry warehouse of 7-38°C and packaged intact, without unsealing, shelf life is three years. Protect from direct sunlight and freezing.