Plastic |
Stone |
Terrazzo |
Epoxy |
Concrete Floors |
Recommendation Method
1. Dilute the product with water at the ratio between 1:5 and 1:20 according to the accumulation degree of wax. The temperature of the water used for dilution is preferably 40-50℃.
2. Apply diluted product on the floor. Stay for 3-5 minutes. Extend the waiting time if the water is cold. Keep
the floor wet.
3. Scrub the floor with disk wiping machine adequately.
4. Clean off the sewage and wax with water absorber.
5. Wipe up the floor with clean wet mop.
6. Wax the floor after the floor is completely dry.
Cautions
This product is alkaline and corrosive. It is an irritant to eyes and skin and harmful if swallowed. Wear rubber gloves when touching original fluid. Store sealed. Prevent the product from freezing to crystallize. Hot water (Preferably 40-50°C) is recommended to dilute it.
It can be applied in Plastic, stone, terrazzo, epoxy, concrete floors and so on.
Performance | Index |
Appearance | Transparent liquid, no delamination |
Colour | Colorless |
Smell pH value(3% aqueous,25˚C) | No peculiar smell 11-13 |
Stability | No crystal and precipitation at 2-5°C |
Viscosity/mPa • s,22°C | ≤100 |
Detailed safety information, please check Material Safety Data Sheet.
Package: 4kg/barrel, 4kg/barrel×4/box or 20kg/barrel.
Storage: Stored at ventilated dry warehouse of 7-38°C and packaged intact, without unsealing, shelf life is three years. Protect from direct sunlight and freezing.