Lovelymore Ultra-strong Floor Sealer contains unique non-alkali-soluble polymer and reticular cross-linked resin. It is a kind of sealer especially used for concrete floor, wear resistant floor and self-leveling cement floor. It can penetrate into concrete pores and close the pores, meanwhile continuous protection films form on the floor surface. It can resist the penetration and corrosion of many chemicals and greasy dirt to floor, and prevent floor pulverizing effectively, so it extends service life of the floor. It can be used for floor with mild traffic alone. It also can be used for highly traffic floor with other floor finish produced by Sunrise.
Concrete |
Terrazzo |
Inorganic Aggregate |
Polyurethane |
Epoxy |
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785758812892936.png "1785758812892936.png")
Recommendation Area
10-30m2/kg/time (Depending on the floor condition).
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785758813285791.png "1785758813285791.png")
Recommendation Method
Clean or remove the residual wax using products recommended by Sunrise. If necessary, acidify the cement floor using products recommended by Sunrise. The performance will be much better if it is used with Lovelymore series of floor polish products from Sunrise.
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785758814628285.png "1785758814628285.png")
Cautions
Used for outdoor floor cautiously. Applying should not be carried in conditions of high humidity (Rainy season) or low temperature (<10°C). Sufficient drying time is necessary. 30-60 minutes are needed normally. Temperature, humidity and ventilation condition will influence drying time.
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785764791709282.png "1785764791709282.png")
Lovelymore Ultra-strong Floor Sealer is optimized for floorings such as concrete, terrazzo, inorganic aggregate, epoxy, polyurethane, etc.
Performance | Index |
Appearance | Milky white liquid |
Odor | Slight ammonia odor |
Solid content (%) | ≥20 |
pH value | 7-9 |
Stability | No crystal and precipitation at 2-5°C for 24h |
Water resistance(2h) | Normal |
Acid resistance (10% HCl, 0.5h, drip) | Normal |
Alkali resistance (100 g/L NaOH, 0.5h, drip) | Normal |
Detailed safety information, please check Material Safety Data Sheet.
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785758818505730.png "1785758818505730.png")
Package: 4kg/barrel, 4kg/barrel×4/box or 20kg/barrel.
![1781749896129327[1].png](/file/ueditor/php/upload/image/20260803/1785758819512824.png "1785758819512824.png")
Storage: Stored at ventilated dry warehouse of 7-38°C and packaged intact, without unsealing, shelf life is three years. Protect from direct sunlight and freezing.
